showcasing the JAS-AUDIO Bravo 2.3 6C33 remote-controlled SET integrated:


The Bravo 2.3 is a remote-controlled integrated SET fitted with Russian 6C33 vacuum tubes and direct-heated tube rectifiers for 18 watts per channel. Acclaimed all-round performance with a capacity for delivering vivid, dynamic and rhythmical sound, the Bravo 2.3 brings listeners exquisite tonal balance over the entire frequency range.

Two separate chokes for noise regulation combine with a continuously adjustable negative feedback control, hand-finished solid wood covers engraved with the Bravo logo, a 16mm thick aluminum alloy front panel, a tube cage, auto bias convenience and four single-ended inputs.



The JAS Bravo 2.1 features low internal resistance 6N5P/6SA7 vacuum tubes for a huge soundstage. It also offers outstanding control with 30 watts per channel and 500V of current damping coupled to low distortion. Applying 6N2 and 6N1 tubes in a multi-stage driver circuit helps deliver transparent and crystal-clear sound. The Bravo 2.1 is supplied with a remote control.



The JAS Bravo 2.2 is truly amazing in reproducing flawless and transparent sound thanks to the ingeniously simple yet reliable circuit design. Meeting the highest industry standard of craftsmanship in production, the remote-controlled 8wpc 300B Bravo 2.2 SET is point-to-point wired with pure solid-core copper wires.



The JAS Array 1.1 dual-mono tube preamp employs two 2A3 for rectification and Solen and M-Cap capacitors for a S/N ratio of better than 90dB and a total gain of 20dB on four inputs and two outputs. Total tube complement is 2 x 2A3, 1 x EL34, 3 x 6SN7, 3 x 6922.



The JAS Audio Array 2.1 tube integrated/power amplifier is a 100lbs machine using 300Bs to drive 805s in a dual-mono single-ended pure class A circuit with point-to-point soldering, Solen capacitors and ALPS potentiometer for 45 watts of power on 5 inputs.

The JAS Musik Tube CD Player in black or silver uses one 6Z4 tube rectifier and one 12AX7 as tube buffer for the output stage. It uses 24-bit Burr Brown PCM1732 24/96 upsampling with HDCD decoding and a Sony transport and laser assembly.

JAS Audio speakers:



The JAS Audio Mini Monitor Series Speakers are all fully biwirable and employ individual chambers for tweeter and mid/woofers. They range from $729 to $1,329/pr, are available in three wood finishes and optional matching stands exist as well.



The JAS Orsa Monitor is a two-way with a twin-ribbon tweeter, 6" Morel DPC midwoofer, switchable crossover (dynamic/reference) finished in multi-layer lacquer wood veneer; 88dB sensitivity and 45Hz - 60kHz frequency response.
The JAS Orior Monitor two-way combines a twin-ribbon tweeter with a 7" Accuton ceramic mid/woofer for 40Hz - 60kHz response and 88dB sensitivity.
The JAS Oscar Floorstander is a 2.5-way with twin-ribbon tweeter and two 6" Morel DPC mid/woofers for a frequency response of 40Hz to 60kHz and sensitivity of 90dB.
The JAS Audio Orsus Floorstander is a 3-way with a twin-ribbon tweeter, a 5.5" Titanium alloy midrange and two 6" Morel DPC woofers for bass extension to 35Hz and 89dB sensitivity.



The JAS Audio Odin Floorstander is a 2.5-way with twin-ribbon tweeter and two 7" Accutom ceramic mid/woofers for an F3 of 29Hz and 89dB sensitivity.
The JAS Audio Plato Floorstander is a 3-way with twin-ribbon super tweeter, a 1" Accuton inverted ceramic dome tweeter, 5.5" Accuton ceramic midrange and two 9" Accuton ceramic woofers for an F3 of 20Hz and sensitivity of 89dB.
The JAS Audio 100K super tweeter is an add-on super tweeter in an aluminum cylinder operative from 7 - 100kHz.
The JAS Audio Orsa/Oscar Center is a 2.5-way with twin-ribbon tweeter and twin 6" Morel DPC mid/woofers.
The Zion P1-S AC cord is a double-shielded single-crystal copper/silver hybrid cable. Each of the three conductors features a combination of 10-gauge copper and twice that amount of high-grade silver and is individually insulated with FEP. The double shielding consists of a layer of aluminum foil and close-lapped tin braiding providing 96% coverage for RFI/EMI avoidance. A 100% cotton cord in the center serves resonance and vibration damping. The result is a better sonic balance which can be characterized as having a warmer response in a full dynamic spectrum. The P1-S is especially good at bringing out the best in the bass region, which is an excellent choice for preamps and amplifiers.
The Zion S1 interconnect is composed of two individual FEP-wrapped conductors made up of 30 stands of 0.002mm continuous high-grade cast silver. The S1 is shielded with a close-lapped selected oxygen-free copper multi-stranded screen providing 98% RFI rejection. The plugs are platinum-plated silver which adds to the overall clarify and fast response of this high-performance cable.
The Zion S-2 Interconnects is composed of four individual FEP-wrapped conductors made up of 30 strands of 0.002mm continuous high-grade cast silver. Two groups of two conductors are separately shielded and twisted together with a similar single-ended shielding design as the S1. Besides having similar characteristics as the S1 in speed and dynamics, the S2 is best described as having the ability to provide smooth top end with a similarly smooth midrange and a well-rounded, rich bass.